15-Tooth Sprocket Puch, with Rubber Cushion

This 15-tooth sprocket is the ideal choice for your Puch moped if you value a smooth and low-vibration ride. It fits common Puch engines like the E50 or Z50 and is specifically equipped with a rubber cushion (vibration damper). This rubber coating ensures that the chain runs more gently on the teeth, which noticeably reduces noise during riding and minimizes chain wear. Made from hardened steel, this sprocket can easily withstand tuned engines.

Helpful tips for you: With 15 teeth, this sprocket is slightly larger than the standard gearing. This means for you: a higher top speed with a lower engine RPM on straight stretches. However, keep in mind that acceleration and power on inclines may decrease slightly as a result. When installing, be sure to check that the retaining washer behind the sprocket nut is correctly bent to prevent it from loosening. An important note regarding chain tension: a chain that is too tightly tensioned not only damages the sprocket but also unnecessarily strains the gearbox bearing of your crankshaft. Always allow about 1 to 2 cm of play in the chain.