Exhaust Gasket / Muffler Puch Maxi 34/23/2 mm – Absolutely airtight for full performance

This high-quality exhaust gasket with dimensions 34 x 23 x 2 mm is the crucial connector between the exhaust bend and the muffler of your Puch Maxi. Only when this connection is absolutely gas-tight can your engine unleash its full power while maintaining the pleasant, original driving sound. A leak at this connection not only leads to a loss of power and oil splashes on the rim but also negatively changes the resonance behavior of your exhaust.

Technical data and material properties

The gasket is made from heat-resistant material specifically designed for the high temperatures at the outlet and in the exhaust system. With an outer diameter of 34 mm and an inner diameter of 23 mm, it fits perfectly into the designated flanges. The thickness of 2 mm provides enough material to reliably compensate for minor unevennesses on the sealing surfaces when tightening the clamp.

Installation and maintenance tips

• Preparation: Before you install the new gasket, you should thoroughly clean the sealing surfaces on the exhaust bend and the muffler of any old gasket residues and soot. A clean surface is the basic requirement for a lasting seal.

• Installation: Insert the gasket flatly and push the parts together. Make sure that the exhaust clamp is tightened evenly so that the gasket does not become misaligned.

• Retightening: Since the material can settle slightly under heat exposure, it is advisable to check the tightness of the screw connection again after the first longer ride when cooled down.