Rear wheel axle Ø 12mm, L:215mm + Cone for Puch/Sachs spoke wheel

Are you looking for a stable and accurately fitting replacement axle for the rear wheel of your moped? This high-quality rear wheel axle is specifically designed for spoke wheels of classic Puch and Sachs mopeds and will get your rear wheel rolling perfectly again.

The axle has a diameter of 12 mm, an overall length of 215 mm, and a fine thread of 12×1.0 mm. The delivery includes the matching wheel cones, allowing you to precisely adjust the wheel bearing system. Due to its solid material processing, it can easily withstand higher loads and ensures a smooth, play-free operation of your rear wheel.

Technical data and product details:

• Product type: Rear wheel axle / rear axle

• Axle diameter: 12 mm (Ø 12mm)

• Overall length: 215 mm

• Thread: M12×1.0 mm

• Scope of delivery: Axle including matching wheel cones

• Compatibility: Spoke wheels from Puch (e.g. Maxi, Supermaxi) and Sachs mopeds

Tips for installation and maintenance:

• Thorough lubrication: Coat the wheel bearing balls with plenty of high-quality rolling bearing grease before inserting the cones, to minimize friction and wear.

• Set bearing play precisely: Tighten the cones on the 12×1.0 mm fine thread so that the wheel runs play-free, but can still be turned very easily and without obstruction. Afterwards, secure the nut properly.

• Protect the thread: Apply some grease or anti-seize paste to the axle threads during installation, to prevent seizing and rust formation.