Curil T2 is a permanently plastic, solvent-free sealing compound with excellent adhesion to sealing surfaces. Since it contains no solvents, no ventilation time is required.

Due to its thermal and chemical resistance, it is suitable as a universal sealant, particularly for demanding sealing connections and applications for easy disassembly. Curil T2 is characterized by very good adhesion to the sealing surface.

General product information:
– Chemical base: Polyurethane
– Curing: None
– Components: Single-component
– Color: Green
– Consistency: High viscosity
– Temperature range: -55°C to +250°C (up to +270°C for 24 hours)
– Maximum sealing gap: 0.2 mm
– pH value: neutral
– Solubility: Easy solubility
– Resistance to: Mineral oils (including with additives), synthetic oils, lubricants, coolants, cold and hot water, saltwater, cleaning agents, weak acids and alkalis, fuels
– Possible areas of application: Closure caps, oil pans, water and oil pumps, differential housings, gearbox housings, thermostat housings, control housings, axle covers, flange connections
In general, all applications for easy disassembly.

General properties:
– Viscosity: 100,000 – 112,000 m/Pas (Brookfield spindle)
– Density: 1.08 +/- 0.1 g/cm3 DIN 53479
– Skin formation/ventilation time: Not required
– Tensile strength: 0.034 N/mm2

Storage:
– Optimal storage conditions: Cool (+5°C to +25°C) and dry
– Minimum shelf life: 36 months in unopened containers, tightly close opened containers.