Complete front axle with sealed ball bearings for Puch, which are originally equipped with open bearings (Leleu).

This is a complete front axle with sealed ball bearings for Puch front wheels, equipped with cast or spoke hubs (Leleu). The ball bearings have an outer diameter of 29 millimeters and are equipped with a dust cover on one side. The set consists of a 157mm long axle, two special ball bearings, two half-height and two full-height M12x1 nuts, and various spacers/rings.

Note: When installing the ball bearings, the long spacer tube must be securely clamped between the two ball bearings to ensure they press against the tube with the inner ring. If this is not the case, the ball bearings may jam.

Dimensions:
- Thread: M12x1mm
- Length: 157 mm
- Bearing outer diameter: 29mm

Note: When you install the ball bearings, the long spacer tube (see photo) must be securely clamped between the two ball bearings so that they press against the tube with the inner ring. If this is not the case, the ball bearings may jam.