Original Piaggio / Vespa Exhaust Gasket Made of Graphite

When working on your Vespa or Piaggio scooter, the connection between the manifold and the muffler is one of the most critical points. With this original graphite exhaust gasket, you ensure that your exhaust system remains completely gas-tight. Graphite is the ideal material for this application, as it is extremely heat-resistant and, due to its slightly compressible structure, perfectly adapts to the sealing surfaces. This prevents disturbing noise and a loss of power due to escaping exhaust gases.

Since this is an original spare part, you can rely on the exact fit. A leak in the exhaust can not only negatively affect the sound but can often lead to an incorrect lambda value measurement, which can disrupt engine performance. With this high-quality gasket, you invest in the longevity and reliability of your two-wheeler.

Installation and Maintenance Tips

Before you install the new gasket, you should thoroughly clean the mounting surfaces on the manifold and in the exhaust from soot residues and remnants of the old gasket. Carefully slide the graphite gasket on, as the material can be brittle and may break if forced. A small dab of copper grease on the outside can facilitate installation and prevent it from seizing for the next change. Tighten the clamp again after the first few kilometers of riding, once the system has heated up properly.

Dimensions:
38.5 x 32 x 30.5 mm

Can be used in vehicles from ADIVA, APRILIA, BENELLI, DERBI, GILERA, ITALJET, MALAGUTI, and others.