Rear Brake Cable Puch Maxi Black – Including Adjustment Screws

To ensure that you can safely bring your Puch Maxi to a stop at any time, a properly functioning brake cable is essential. Our brake cable for the rear wheel of your Puch Maxi is the ideal solution if your current cable is stiff, jammed, or shows signs of wear. This high-quality cable is delivered in classic black, including the necessary adjustment screws, so you don’t waste any time during installation and can start fine-tuning right away.

The inner cable is made of extremely tensile steel, while the black outer housing features a special internal coating for minimal friction. This guarantees you optimal power transmission from the brake lever to the brake cam on the rear hub. As the rear brake cable is longer due to its design, particular attention has been paid to flexibility while maintaining high stability, ensuring that the brake point remains crisp at all times.

Tips for Installation: Carefully route the cable along the frame of your Puch Maxi and use the original retaining clips or guide tabs. Make sure the cable does not run too close to the exhaust or moving parts of the chain. Using the adjustment screws included in the set, you can precisely adjust the play at the handbrake lever or on the brake anchor plate. After installation, you should rotate the rear wheel while lifted to ensure that the brake does not rub in its resting position.

Maintenance Instructions: For particularly long durability, it is advisable to lubricate the cable with a little silicone spray or thin cable oil before installation. Since the rear brake cable is more exposed to splash water and dirt due to its position, you should regularly check it for cracks in the outer housing. This prevents moisture from penetrating and causing the steel cable to corrode.

Dimensions:
Total Length: 165.5cm
Housing Length: 150cm

This item fits, among others, the following models:
- Puch Maxi-N
- Puch Maxi-S
- Puch Supermaxi